Compact seal type 0710

• Low friction , free of stick-slip
• Due to the special profile it can be used in pair or in front of the u-ring .
• Long service life
• High sliding speed
• Wide range of temperature and chemicals depending on the o-ring material
• Minimum static and dynamic friction coefficient for a minimum energy loss and operating temperature
• Simple groove design and low axial housing heights

We recommend using special assembly tool (See section; Hydraulic Sealing Elements General Installation Information). It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.

Mineral oils

• from -30°C till +105C
• max. 400 Bar
• max. 5.0 m/s

• from +5°C till +60°C
• max. 400 Bar
• max. 5.0 m/s

• from -30°C till +60°C
• max. 400 Bar
• max. 5.0 m/s

0710 type of rod seal can be also used with double lip wipers. For special applications that require high temperatures or resistance to chemicals , piston seal is being manufactured with special mixture PTFE and FKM material. For heavy duty applications and high pressures the tolerances should change to H8/f8 and please contact the customer service to choose the suitable sealing element. The permissible sealing gap values of type 0710 rod seal is given in the below table.